Question 1

How to Solve common issues caused by Cache.

Accepted Answer

If you're facing any issue that you think shouldn't happen or the Plugin isn't behaving properly? Then you might wanna do the Following:

Clear your browser cache.
Clear/purge any cache plugin.
Clear/purge if you're on CDN.
Re save Permalink.
Might be a Plugin.

Clear your browser cache

Most of the time any unusual plugin behavior or any kind of new is caused by the Browser Cache. Clearing your Browser Cache might help here. You can also try Incognito Mode in such situations. Here's an article to clear browser cache on any Browser: elegantthemes.com/blog/wordpress/how-to-clear-all-browser-caches

Clear/purge any cache Plugin

If you've installed any Caching plugin like WP Super Cache, W3 Total Cache or similar Caching Plugins, then you must try to clear your Cache using the Plugin. Almost every plugin provide an option in admin bar to Clear/Purge Cache. Take a look 👀

Clear/purge if you're on CDN

Your CDN might be a culprit, so you must clear your CDN Cache as well. Login to your CDN Provider Dashboard and find an option to clear your CDN Cache.

Re save Permalink

Resaving you permalink might be helpful sometimes. Here's how to resave it:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/G2VfMYu1NZ/Screen%20Recording%202020-12-18%20at%2012.23.59%20PM.gif (Screen Recording 2020-12-18 at 12.23.59 PM.gif)

Might be a Plugin.

Try to deactivate all the plugins installed on your site to see If there's any conflict caused by any plugin you've installed on your site. If you found out that your issue was caused by this specific plugin, you might need to report them about the conflict.

Question 2

Divi Flipbox Module

Accepted Answer

With over 15 effects to choose from, you can now create stunning interactive content that converts.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/IbfuY8lsfa/showcase.gif (showcase.gif)

Content Options

Q: Divi Supreme Requirement

Minimum Requirements WordPress 4.5 or greater PHP version 7.0 or greater MySQL version 5.0 or greater We recommend your host supports PHP version 7.0 or greater MySQL version 5.6 or greater WP Memory limit of 64 MB or greater (128 MB or higher is preferred) Divi Supreme recommend and required the following: Divi Theme >= version 4.1 Extra Theme >= version 3.1 Divi Builder >= version 3.1 PHP version >= 7.0

+ Flipbox Item

This is where you add content, images and icon to your Flipbox Module. Just like a Blurb Module but with Front and Back Animation to show the front and back of an element when you hover. Clicking “add new item” will open a completely new list of design settings (including Content, Design, Advanced) for your new Flipbox. See below for individual Flipbox settings.

After you add your first image, you will see a gray bar appear with the title of your Flipbox shown as a label. The gray bar also has three buttons that allow you to edit, duplicate, or delete the image.

Note: Create only two items because one is identify as Front and the other as Back.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/3Z6sx0WARQ/flipbox-1-693x1024.png (flipbox-1-693x1024.png)

Design Options

Sizing

--Height

By default, the flipbox is set at 200px. You can set to other height to suit the content of your flipbox. This is one of the most important part when using flipbox. If you content is too long and doesn’t look right. Adjust your height.

Animation

This is where you can change the flipbox animation effect.

Trigger Animation On

Choose a trigger animation for the Flipbox here. You can either select "Hover" or "Click". When you'll select Click the Flipbox will flip on Click instead of on hover.

Click On

This option will appear once you'll select the Trigger method as "Click". And from here you can choose If you want to flip the Flipbox on Whole Flipbox click or Button click.

Flipbox Type

There are 5 types of Flipbox Effect to choose from.

Flip
Slide
Zoom In
Zoom Out
Fade
See Flipbox Demo here.

Flip Animation

There are 4 types of Flip Effect to choose from. "Flip Left" "Flip Right" "Flip Up" "Flip Down"

3D Effect

This option will only show up when you choose Flipbox Effect as Flip And this will create a 3D effect to your Flipbox.

Slide Animation

This option will only show up when you choose Flipbox Effect as Slide

There are 4 types of Slide Effect to choose from. "Slide Left", "Slide Right", "Slide Up" and "Slide Down".

Zoom In Animation

This will have a zoom in animation on your flipbox.

Zoom Out Animation

This option will only show up when you choose Flipbox Effect as Zoom Out

There are 5 types of Zoom Out Effect to choose from. Zoom Out Zoom Out Up Zoom Out Down Zoom Out Left * Zoom Out Right

Animation Speed (in s)

This will control the speed animation of the flipbox.

Advanced Options

Use the advanced options to give your text module custom CSS ID’s and Classes. Add some custom CSS for advanced styling and designate the module’s visiblity on certain devices.

Flipbox Item Content

Title

Give a title to your Flipbox that will appear above the body text of the Flipbox in a bold text style.

Sub Title

If you would like to use a sub title, add it here. Your sub title will appear below your title in a small font.

Content

This field is where you can enter the body content of your Flipbox. Flipbox Text will also span the full width of your column.

Use Icon

When using Flipbox, you can choose to either use an Icon or and Image with your text. If you select “yes” for the “Use Icon” option, then you will be presented with the following options to customize your icon. If you do not choose to use an Icon, then you will be prompted to upload an image instead.

Icon

If you chose “yes” for the “Use Icon” setting, then this option will appear. This options presents you with a list of available icons that you can use with your Perky Animate text. Simply click on the con that you would like to use and it will appear in your Flipbox.

Image

If you did not choose to use an Icon, then this setting will appear. Place a valid image url here, or choose/upload an image via the WordPress Media Library. However, your image will never scale larger than its original upload size. The height of the Flipbox image is determined by the aspect ratio of your original image, so making all of your Flipbox images the same height is a good idea if you are placing them side by side.

Button

Button Text

Input your desired button text.

Button URL

Input the destination URL for your button.

URL Opens

Here you can choose whether or not your link opens in a new window.

Flipbox Item Design Options

Within the design tab you will find all of the module’s styling options, such as fonts, colors, sizing and spacing. This is the tab you will use to change how your module looks. Every Divi module has a long list of design settings that you can use to change just about anything.

Image & Icon

Icon Color

If you chose “yes” for the “Use Icon” setting, then this option will appear. This option allows you to customize the color of your Icon. By default, the icons are set to your theme accent color.

Circle Icon

If you chose “yes” for the “Use Icon” setting, then this option will appear. This options allows you to place your icon within a colored circle. If you select “yes” for this setting, then you will be presented with additional options for customizing your circle color and border.

Circle Color

If you chose “yes” for the “Circle Icon” setting, then this option will appear. Here you can pick a color to use for your circle. This color is independent from your Icon color selected earlier. You icon, in it’s color, will appear inside this a circle with the color you select here.

Show Circle Border

If you chose “yes” for the “Circle Icon” setting, then this option will appear. This option allows you to turn on a border for your circle. If selected, an additional option will appear to select your border color.

Circle Border Color

If you chose “yes” for the “Show Circle Border” setting, then this option will appear. Here you can adjust the color of the circle border.

Use Icon Font Size

If enabled, you can input a custom size for the icon that is displayed.

Sizing

Here you can change the width of the image.

Width

Applying a max width value here will limit the width of the Flipbox image. This only affects Flipbox that are not in icon mode.

Spacing

Custom Padding

Padding is the space added inside of your flipbox item, between the edge of the file and its internal elements. You can add custom padding values to any of the flipbox item’s four sides. To remove custom margin, delete the added value from the input field. By default these values are measured in pixels, but you can input custom units of measurement into the input fields.

Flipbox Item Advanced Options

Use the advanced options to give your text module custom CSS ID’s and Classes. Add some custom CSS for advanced styling and designate the module’s visiblity on certain devices.

Question 3

Divi Read More Extension

Accepted Answer

This will allow you to Collapse Long Texts into Nested form. Providing you more way to Showcase Long Texts or Paragraphs on your Divi Website.

Currently, the available supported modules are listed below:

Text Module
Blurb Module
Call-to-action Module
Blog Module

Before Using ReadMore Extension:

Before you start using the Read More Extension make sure that It’s Enabled from the Plugin Settings. Go to Divi Supreme Pro > Enable ReadMore Content and the Click on the Save Changes button.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/oJb6m3Rcv6/readmore%20content%20enable.png (readmore content enable.png)

Usage

To use Read More Extension, go to any of the supported modules (listed above) settings and navigate to the Advanced Tab Scroll to Visibility and look for Use Read More Switch.

Use Read More

This will enable or disable the Read More extension.

Show on Mobile Only:

Using this you can Collapse text for Mobile Devices only making it more Responsive.

Collapsed Height:

You can select the Height of the text to be shown and after the height will end the Read More text will show to show the full text.

Read More Text:

Enter your own Text for the Read More Text e.g. Show Full Text, Continue Reading.

Close Text:

Enter your own Text for the Close Text e.g. Show Less Text, Stop Reading.

Designing the Read More Text

Font: Change the Font of the Read More Text.
Font-weight: Change the Weight of the Read More Text.Font Style: Change the Style of the Read More Text.
Font Style: Change the Style of the Read More Text(Italic, UpperCase, Underline and more).
Text-Alignment: Change the Alignment of the Read More Text.
Text Size: Change the Size of the Read More Text.
Link Text Color: Change the Color of the Read More Text.

Use Shadow

It will add a very Nice Shadow to the text will make it more attractive for the visitors

Question 4

Enable SVG Upload in Divi

Accepted Answer

We've added a new functionality to Divi Supreme and using that you can easily Enable the SVG Uploads in Divi by simply enabling a switch.

How to Enable SVG Uploads

To enable the SVG Uploads in Divi all you've to do is open up Divi Supreme Settings > Misc > Allow SVG file Upload enable this switch and click on Save Changes button.

Now when you'll try to upload any SVG to Media Library or from anywhere where you can access media Library, you'll see the SVG file uploads without any restrictions.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/PqDMNAFOcC/SVG%20Uploads%20in%20Divi.png (SVG Uploads in Divi.png)

That's how easily you can enable SVG uploads in Divi using this extra option available in Divi Supreme. Hope you'll find it useful and you'll don't need to add custom code to functions.php or install a separate plugin for this.

Question 5

SCRIPT_DEBUG and et_load_unminified_scripts issue

Accepted Answer

If you're getting this error Notice after Installing Divi Supreme than this guide will help you to solve this issue. This is a bug in Divi and we're hoping that it will be solved very soon.

Error Message: Divi uses uncombined and unminified javascript files because "SCRIPT_DEBUG" constant on wp-config.php has been set to "true". Other plugin can enforce Divi to use uncombined and unminified javascript files by filtering "et_load_unminified_scripts" filter as well.

To Solve:

Deactivate Divi Supreme Plugin, If you've installed both Pro/Free than deactivate both.
Go to Divi -> Theme Options -> and Turn On "Minify And Combine Javascript Files" and Save the Changes.
Now Reactivate Divi Supreme Pro/Lite and you'll not face this issue.

Have a great day!

Question 6

Divi Supreme Pro Plugin Update

Accepted Answer

Updating Plugin

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/WYPQbzUo2T/auto-update.png (auto-update.png)

Question 7

Divi Floating Multi Images Module

Accepted Answer

A better and unique way to showcase multiple images to your visitors by using Floating Multi Images module. You can also change the animation either up/down or left/right.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/Tg7h9AD6h4/showcase-1.gif (showcase-1.gif)

Content Options

+ Image Item

This is where you add image to your Floating Multi Images Module. Clicking “add new item” will open a completely new list of design settings (including Content, Design, Advanced) for your new image. See below for individual image settings.

After you add your first image, you will see a gray bar appear with the title of your pin shown as a label. The gray bar also has three buttons that allow you to edit, duplicate, or delete the image.

Animation

This is where you can change the floating animation effect.

Floating Effect

There are two types of Floating Animation Effect.

Up Down
Left Right
See Floating Multi Images here. The left column with Up Down animation and the right column with Left Right animation.

Image animation delay interval (in ms)

You can add a delay for the Animation to start in ms here.

Animation Speed

Here you can change the speed of the Floating Images Animation.

Image Item

Image

Place a valid image url here, or choose/upload an image via the WordPress Media Library. Images will always appeared left justified within their columns and will span the full width of your column. However, your image will never scale larger than its original upload size. The height of the image is determined by aspect ratio of your original image.

Link

Open in Lightbox

Enable this switch to open the Image in Lightbox/Overlay.

Design Options

Within the design tab you will find all of the module’s styling options, such as fonts, colors, sizing and spacing. This is the tab you will use to change how your module looks. Every Divi module has a long list of design settings that you can use to change just about anything.

Sizing

Here you can change the placement and the width of the image.

Horizontal Align

Here you can change the horizontal alignment(left/right) of the image in percentage.

Vertical Align

Here you can change the vertical alignment(up/down) of the image in percentage.

Width

You can adjust the width of image.

Advanced Options

Use the advanced options to give your text module custom CSS ID’s and Classes. Add some custom CSS for advanced styling and designate the module’s visiblity on certain devices.

Question 8

General Info - Divi Extensions

Accepted Answer

Divi Supreme features a huge collection of custom creative modules and extensions that can be used in the Divi Theme, Extra Theme and the Divi Builder. We will keep on adding and enhance Divi Supreme Pro where you can find extra features for Divi to help you build better websites.

Currently, the available extensions are listed below:

Divi Popup
Divi Scheduled Element
Divi Easy Theme Builder
Divi Responsive Viewer
Read More
Divi Library Shortcodes

Enable Extensions

To enable Divi Supreme Extensions, login to your WordPress admin panel, then on your admin menu, look for Divi Supreme Pro here you can then choose which extension you'd like to use just enable it to start using it.

Question 9

License Key Activation Issue

Accepted Answer

This happens when you move to a new hosting or deleted the Plugin without deactivating License. To solve this, simply login to your Divi Supreme Account > Orders > License Manage and deactivate that domain you're having problem with currently.

Then go to your WordPress Admin Dashboard -> Divi Supreme -> License and activate the license again.

That's it. Good luck.

Question 10

Divi Supreme Requirement

Accepted Answer

Minimum Requirements

WordPress 4.5 or greater
PHP version 7.0 or greater
MySQL version 5.0 or greater

We recommend your host supports

PHP version 7.0 or greater
MySQL version 5.6 or greater
WP Memory limit of 64 MB or greater (128 MB or higher is preferred)

Divi Supreme recommend and required the following:

Divi Theme >= version 4.1
Extra Theme >= version 3.1
Divi Builder >= version 3.1
PHP version >= 7.0

Question 11

Divi Content Timeline Module

Accepted Answer

Divi Supreme Content Timeline Module allows you to create beautiful and compelling timelines using your content. With its easy-to-use interface, you can create a timeline in minutes, without any coding required. Plus, the module is fully responsive, so it looks great on any device.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/hHchTOvzqF/2022-05-16%20at%2011.52.38.png (2022-05-16 at 11.52.38)

Content Options

Adding Timeline Items

Click on + Add new Item to add your first Timeline Item. Clicking + Add new Item will open a completely new list of design settings (including Content, Design, Advanced) for your new Timeline.

See below for individual Timeline Item settings.

After you add your first Timeline, you will see a gray bar appear with the title of your Timeline shown as a label. The gray bar also has three buttons that allow you to edit, duplicate, or delete the Timeline.

General

Style

Choose a style for your Timeline here. You can select Left, Right, or Center.

Mobile/Tablet Style

Here you can choose Style for Mobile/Tablet only. You can select either Left or Right.

Show Card Arrow

Enable this option If you'd like to show Card Arrow pointing to the Pointer Element in the Timeline.

Enable Tree Animation

If you want to show Scroll Animation on Tree, enable this option. You'll be able to customize the colors from the Design tab.

Design Options

Alignment

Here you'll be able to change Content Alignment.

Title Text

This is where you can customize the Title Text by changing its font, size, color and weight and even add shadow to the Title.

Content

This is where you can customize the Content Description by changing its font, size, color and weight etc.

Opposite Text

This is where you'll be able to customize the Opposite Text, If you've added. Opposite text shows Opposite side of the Content Timeline for each item.

Background Color

Change the Background color of the Opposite Text here.

Width

You can adjust the width of the Opposite Text here.

Padding

If you'd like to add Padding to the Opposite text, you can do so here.

Else you can customize the Opposite Text by changing its font, size, color and weight & even add Border, Border Radius & Box Shadow. However you like.

Card

This is where you'll be able to customize the Cards.

Background

You can change the Card Background from here. You can even change Card Background from each item Content Options. If you'd like to have a different color for each or If you decide to use Image for Card Background.

Margin

Here you'll be able to add Margin to the Card If needed.

Padding

Here you can add Padding to the Card If needed.

Else you can customize the Card by adding Border, Border Radius & Box Shadow etc.

Pointer

This is where you'll be able to customize the Pointer Element.

Background Color

Here you can change Background color of the Pointer - for Normal State.

Active Background Color

Here you can change Background color of the Pointer - for Active State. If Tree Animation Enabled.

Icon Color

Here you can change Icon color of the Pointer - for Normal State. If you've added Icon from Item Content Options.

Active Icon Color

Here you can change Icon color of the Pointer - for Active State. If you've added Icon from Item Content Options.

Icon Font Size

Here you can change the Icon Size If you wish to.

Else you can customize the Pointer by adding Border, Border Radius & Box Shadow etc.

Tree

Background

You can change the Tree Background/Line color from here.

Active Background

You can change the Tree Background/Line color from here for Active State. If Tree Animation is enabled.

Width

Here you can change the Tree Line Width If you wish to.

Image & Icon

This is where you'll be able to customize the Image & Icon of the Card.

Icon Color

Here you'll be able to change the Icon Color.

Icon BG Color

This is where you'll be able to change Icon Background color.

Icon Font Size

Here you can change Icon Font Size If you wish to.

Image Width

If you're using Image instead of Icon, you can change Image width from here.

Image/Icon Alignment

Here you'll be able to change Image or Icon Alignment.

Else you can customize the Image/Icon by adding Padding/Margin, Border, Border Radius & Box Shadow etc.

Button

Enable Use Custom Styles for the button to add custom styling to the button. You can design the button same way you always design your Divi Buttons you can change button, font, size, weight and more and play with Margin and Padding and also you can add Corner Radius, Border and Box Shadow to the button.

Animation

This part is important, If you'd like to add Entrance Animation to the Cards just as shown in the demo. You can do so here. We're using Divi's Animation Presets to add Animation to the Card the way you like. Just select any animation and adjust it the way you like.

Please Note, the animation will only work on Frontend and might not show correctly in Divi Builder.

Advanced Options

Use the advanced options to give your Content Timeline module custom CSS ID’s and Classes. Add some custom CSS for advanced styling and designate the module's visibility on certain devices.

Content Timline Item Content Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/YLTtVsgsby/2022-04-26-at-17.08.44.png (2022-04-26-at-17.08.44)

Content

Use Image/Icon

Enable this option If you'd like to use Image/Icon. Once enabled, you'll see option to add your Image.

Use Icon

Enable this option If you'd like to use Icon Instead.

Image/Icon Placement

Here you can change the Image/Icon Placement to either Top of Content or on Left of the content.

Title

Add Your Title here.

Content

Here you'll be able to add your Content Description.

Use Pointer Image/Icon

Enable this option If you'd like to use Image or Icon in the Pointer. You'll then see a new Panel where you can add your Image or Icon.

Opposite Text

You can add your Opposite text here.

Pointer Image/Icon

You'll see this panel, If you enable "Use Pointer Image/Icon" from the Content Panel. Once enabled, you'll be able to add your Image to the Pointer or add Icon from Divi's Icon Library.

Button

Button text

Add text to the button here you can always remove the text of the element which you don’t want.

Button Link URL

Add a URL to the button here.

Button Link Target

Choose whether you'd like to open the URL in a new Tab or the Same Tab.

Timeline Item Design Options

Alignment

Here you'll be able to change Content Alignment.

Title Text

This is where you can customize the Title Text by changing its font, size, color and weight and even add shadow to the Title.

Content

This is where you can customize the Content Description by changing its font, size, color and weight etc.

Opposite Text

This is where you'll be able to customize the Opposite Text, If you've added. Opposite text shows Opposite side of the Content Timeline for each item.

Background Color

Change the Background color of the Opposite Text here.

Padding

If you'd like to add Padding to the Opposite text, you can do so here.

Else you can customize the Opposite Text by changing its font, size, color and weight & even add Border, Border Radius & Box Shadow. However you like.

Button

Enable Use Custom Styles for the button to add custom styling to the button. You can design the button same way you always design your Divi Buttons you can change button, font, size, weight and more and play with Margin and Padding and also you can add Corner Radius, Border and Box Shadow to the button.

Image & Icon

This is where you'll be able to customize the Image & Icon of this Item Card.

Image/Icon Width

You can change Image/Icon width from here.

Image/Icon Alignment

Here you'll be able to change Image or Icon Alignment.

Else you can customize the Image/Icon by adding Padding/Margin, Border, Border Radius & Box Shadow etc.

Card

Here you'll be able to customize this Item's Card. You can customize it by adding Padding/Margin, Border, Border Radius & Box Shadow etc.

Timeline Item Advanced Options

Use the advanced options to give your Content Timeline Item custom CSS ID’s and Classes. Add some custom CSS for advanced styling and designate the module’s visibility on certain devices.

Question 12

Divi Lottie Module

Accepted Answer

Lottie is an iOS, macOS, Android, and React Native library that renders After Effects animations in any native app. And we’re bringing it to Divi with a Custom Module that’ll let you add beautiful animations with ease.

Click here to see live demo.

Content Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/efKqxhL969/content%20options.PNG (content options.PNG)

Lottie JSON File

Here you’ll need to upload the .JSON File that you’ll download from LottieFiles and you don’t have to worry about uploading a .JSON File because Divi Supreme already did it for you.

Loop

If you want to keep running/Looping enable this option.

Number of Times

Here you can specify the number of times the Animation will Loop. If you enter 2 the animation will loop 2 times and then it will stop.

Direction

Here you can change the direction of the animation it maybe either Normal or Reverse.

Speed (More is Faster)

Here you can change the speed of the animation the more value you’ll enter here the more speed of the animation will be.

Trigger

Enable this option to trigger the animation on Hover or Click.

Trigger Method

Play Animation on Hover/Mouse over - This option will let you play the Lottie Animation when you hover the mouse on the Animation.
Play Animation on Click - This option will let you play the Animation on click. So when you'll click the Animation it will play.
Play Animation on Scroll - (A great addition) This will let you animate the Animation on Scroll. Create something extraordinary.

Relative To

Entire Page - You can relate the animation Scroll to Entire Page, more option will be added in upcoming Updates!

On Mouseout action

This option will show if you select the Animation Trigger method as "Hover". And it will let you do different things with Animation like Stop, Pause or Reverse the Animation when you move the mouse away from the Module.

Animate in Viewport

Here you can play around with animation to play at a specific viewport.

Design Options

Because It’s an animation you don’t need to do any design settings here. But if you want then you can add a Box Shadow, Corner Radius and Play around with other settings here.

Advanced Options

Use the advanced options to give your Lottie Module custom CSS ID’s and Classes. Add some custom CSS for advanced styling and designate the module’s visibility on certain devices.

Question 13

Divi Image Accordion Module

Accepted Answer

Let's you display all of your images on your Divi website with a stunning hover/click animation and effects. Add as many items as you need providing them with icons, images, titles, descriptions, buttons, and links easily and quickly. It ensures the perfect image quality and combines them beautifully with amazing accordion effects.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/BbJQFpk7nt/Image%20Accordion-min.gif (Image Accordion-min.gif)

Content Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/WGFsRyv2NN/image%20accordion%20content%20options.png (image accordion content options.png)

Click on + Add new Item to add your first Image Accordion Item. Clicking + Add new Item will open a completely new list of design settings (including Content, Design, Advanced) for your new Image Accordion.

See below for individual Image Accordion Item settings.

After you add your first Accordion Item, you will see a gray bar appear with the title of your Image Hotspot shown as a label. The gray bar also has three buttons that allow you to edit, duplicate, or delete the Image Accordion in the Main Content tab.

Accordion Settings

Accordion Type

Here you can choose whether to open the Image Accordion by Hover or Click.

Accordion Content Animation

Choose any animation from 5 different animations for Content entrance.

Use Sequenced Animation

Enabling this option will add animation separately to all Elements in the Accordion such as Title, Description, Button, Icon etc.

Accordion Direction

You can change the accordion direction to either Horizontal or Vertical.

Accordion Height

Change Accordion height from here.

Design Options

Overlay

Overlay Color

You can add Accordion to each Accordion from here, just change the color to any RGBA Value and it will be applied over your Image. This could be helpful to read your text clearly.

Icon

Icon Color

Change Icon color from her, If you've added in the Accordion.

Use Icon Font Size

Enable this option If you want to change the size of the Icon, you'll then see a handle to control the size of the Icon.

Icon Image

If you've replaced your Icon with an Image then you can manage It's styling from here, you can add Border, Corner radius and Box Shadow.

Title

Title Heading Level

Change the Heading level of the Title from H1 to H6.

And else you can play around with other settings to style the Title text.

Description

Here you can play around with the styling of the Description text the same way you style the paragraph in Default Text Module.

Button

This is where you can style the Button If you've added in Accordion. Enable the switch "Use Custom Styles for Button" and then you'll see options to style the button the same way you design Default Divi Buttons.

Advanced Options

Use the advanced options to give your Image Accordion module custom CSS ID’s and Classes. Add some custom CSS for advanced styling and designate the module's visibility on certain devices.

Image Accordion Item Content Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/E7ulEQRwOA/item%20content%20options.png (item content options.png)

Make Item Expanded

As the name suggests, enable this option If you want the Item to be expanded by default.

Image

Add the Main Image for the Accordion here.

Use Icon

Enable this option If you want to add an Icon to the Accordion Content, then disable the switch If you want to use Image instead of icon.

Title

Your Main Title goes here.

Description

Your Description content goes here.

Show Button

Enable this switch If you want to use Button in your Accordion, then It will ask you for the Button Text & URL.

Horizontal Align

Here you can align the Accordion Content Horizontally to Left, Right & Center.

Vertical Align

Here you can align the Accordion Content Vertically to To, Bottom & Center.

Image Accordion Item Design Option

Overlay

Overlay Color

You can add Accordion to each Accordion from here, just change the color to any RGBA Value and it will be applied over your Image. This could be helpful to read your text clearly. Enable Hover option to add a Hover Overlay effect ~ Best for Item settings.

Title

Title Heading Level

Change the Heading level of the Title from H1 to H6.

And else you can play around with other settings to style the Title text.

Description

Here you can play around with the styling of the Description text the same way you style the paragraph in Default Text Module.

Button

This is where you can style the Button If you've added in Accordion. Enable the switch "Use Custom Styles for Button" and then you'll see options to style the button the same way you design Default Divi Buttons.

Sizing

Content Width

Change the Content width from here.

Image Accordion Item Advanced Options

Use the advanced options to give your Image Accordion Item module custom CSS ID’s and Classes. Add some custom CSS for advanced styling and designate the module's visibility on certain devices.

Question 14

Divi Supreme Circle Info Module

Accepted Answer

The Divi Supreme Circle Info Module helps you create beautiful, interactive circle information in Divi. You can use it to display important information about your business, service, or product in an engaging way. The module is easy to use and comes with a variety of customization options. With the Divi Supreme Circle Info Module, you can create a unique and informative way to present your business or product.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/HBsePIxHOp/2022-11-28%20at%2002.43.03.png (2022-11-28 at 02.43.03)

Content Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/PS7JxEzGth/2022-11-28%20at%2002.44.08.png (2022-11-28 at 02.44.08)

Adding Circle Info Items

Click on + Add new Item to add your first Circle Info Item . Clicking + Add new Item will open a completely new list of design settings (including Content, Design, Advanced) for your new Circle Info Item.

See below for individual Circle Info Item settings.

After you add your first Circle Info Item, you will see a gray bar Circle Info Item near with the title of your Circle Info shown as a label. The gray bar also has three buttons that allow you to edit, duplicate, or delete the Circle Info Item.

General

Enable Autoplay

You can enable the use of Autoplay on Circle Info Items, and items will change after the specified time.

--Speed

Here you can adjust the speed of the Autoplay.

--Delay

Here you can adjust the delay of the Autoplay.

Trigger

Choose whether you want to change Circle Info on Click or Hover.

Circle Size

Here you can adjust the size of the Circle, you can enable Responsive option to adjust the size for Mobile Devices.

Content Animation

Here you can change the Animation of the Content from 30+ Animations.

Design Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/JOfqHC2W6q/2022-11-28%20at%2002.49.34.png (2022-11-28 at 02.49.34)

Circle

Here you can customize the Circle by adding Border, Border Radius & Box Shadow etc.

Content - General Tab

Here you can customize the Content Info by adding Padding, Border, Border Radius & Box Shadow etc.

Content - Title Tab

Here you can customize the Title of Content by changing its font, size, color and weight etc.

Content - Description Tab

Here you can customize the Description of Content by changing its font, size, color and weight etc.

Circle Item - General Tab

Circle Size

Here you adjust the size of the Circle Item that shows with the Circle line as a Circle!

Else you can customize the Title of Circle Item by changing its font, size, color and weight etc.

Circle Item - Normal Tab

Background Color

Here you can change the Background color for the Circle Item - Normal State.

** Color**

Here you can change the Title/Icon color for the Circle Item - Normal State.

Else you can customize Normal State by adding Border, Border Radius & Box Shadow etc.

Circle Item - Active Tab

Background Color

Here you can change the Background color for the Circle Item - Active State.

** Color**

Here you can change the Title/Icon color for the Circle Item - Active State.

Else you can customize Active State by adding Border, Border Radius & Box Shadow etc.

Image & Icon - Icon Tab

Icon Size

Here you can adjust the size of the Icon.

Background Color

Here you can change the Background color of the Icon - Normal State.

Active Background Color

Here you can change the Background color of the Icon - Active State.

Color

Here you can change the color of the Icon - Normal State.

Active Color

Here you can change the color of the Icon - Active State.

Else you can customize the Icon by adding Margin/Padding, Border, Border Radius & Box Shadow etc.

Image & Icon - Image Tab

Image Width

Change the Image Width here.

Else you can customize the Image by adding Border, Border Radius & Box Shadow etc.

Button

Enable Use Custom Styles for the button to add custom styling to the button. You can design the button same way you always design your Divi Buttons you can change button, font, size, weight and more and play with Margin and Padding and also you can add Corner Radius, Border and Box Shadow to the button.

Advanced Options

Use the advanced options to give your Circle Info module custom CSS ID’s and Classes. Add some custom CSS for advanced styling and designate the module's visibility on certain devices.

Circle Info Item Content Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/QWR5zpbwbH/2022-11-28%20at%2003.01.30.png (2022-11-28 at 03.01.30)

General

Title

Here you can add your Title for the Circle Item.

Use Icon

Enable this option If you'd like to use Icon, you can disable it to use your own custom image.

Content

Title

Your Title for Content goes here.

Content

Here you can add your Description for Content.

Button Text

If you'd like to add a Button, simply add in Button Text here.

Button URL

Change the Button URL here.

Button Link Target

Change the Button Link Target to either open in "Same Window" or in a "New Tab".

Circle Info Item Design Options

Circle Item - General Tab

Here you can customize the Title of Circle Item by changing its font, size, color and weight etc for this specific item.

Circle Item - Normal Tab

Here you can customize Normal State by adding Border, Border Radius & Box Shadow etc for this specific item.

Circle Item - Active Tab

Here you can customize Active State by adding Border, Border Radius & Box Shadow etc for this specific item.

Content - General Tab

Here you can customize the Content Info by adding Padding, Border, Border Radius & Box Shadow etc.

Content - Title Tab

Here you can customize the Title of Content by changing its font, size, color and weight etc.

Content - Description Tab

Here you can customize the Description of Content by changing its font, size, color and weight etc.

Image & Icon - Icon Tab

Icon Size

Here you can adjust the size of the Icon.

Background Color

Here you can change the Background color of the Icon - Normal State.

Active Background Color

Here you can change the Background color of the Icon - Active State.

Color

Here you can change the color of the Icon - Normal State.

Active Color

Here you can change the color of the Icon - Active State.

Else you can customize the Icon by adding Margin/Padding, Border, Border Radius & Box Shadow etc.

Image & Icon - Image Tab

Image Width

Change the Image Width here.

Else you can customize the Image by adding Border, Border Radius & Box Shadow etc.

Button

Enable Use Custom Styles for the button to add custom styling to the button. You can design the button same way you always design your Divi Buttons you can change button, font, size, weight and more and play with Margin and Padding and also you can add Corner Radius, Border and Box Shadow to the button.

Circle Info Item Advanced Options

Use the advanced options to give your Circle Info Item custom CSS ID’s and Classes. Add some custom CSS for advanced styling and designate the module’s visibility on certain devices.

Enhancing Circle Info Responsiveness for Mobile/Tablet View

To optimize the circle info for mobile and tablet devices, consider enabling the responsive option and manually resizing the Circle Size. For visual guidance, a helpful video has been provided below.

Note: The appearance in Divi Builder may differ, but the circle info should display correctly on the front end.

Question 15

Divi SVG Animation Module

Accepted Answer

SVG animations are an easy way to add some pizzazz to your Divi website. The Supreme SVG Animation module makes it easy to create these animations, without any coding required. Just select the animation you want to use, and the module will handle the rest. With this module, you can easily add beautiful animated graphics to your website, without any headaches.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/nyRD1BNjmo/2022-10-04%20at%2020.44.43.gif (2022-10-04 at 20.44.43)

Content Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/fTAs9Vyk5a/2022-10-03-at-18.54.37.png (2022-10-03-at-18.54.37)

General

Use SVG Code

Enable this option If you'd like to use SVG Code Instead.

SVG File

Here you can upload your SVG File.

Settings

Type

Here you choose the Type of SVG Animation, you've option to choose from below options:

Delayed
Sync
One-by-One

Animate Timing Function

Here you can choose the Speed Curve for your Animation, you can choose whatever option works best for you.

Loop

Enable this option If you'd like the SVG Animation to Loop.

Unlimited

If enabled, the animation will Loop infinitely. You can disable to set a custom number times the animation will Loop.

Trigger

Enable this option to choose a Trigger type for your SVG Animation.

--Trigger Type

Here you can choose the Trigger Type, you can select Triggers from below options:

Start Animation when in Viewport
Start on Hover
Start on Click

Speed

Change the Speed of your SVG Animation here, the lower the value the faster the animation will be.

Delay

If you want to delay your animation, you can do so here.

Design Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/yTil6KxH5F/resources/OCsGuNpVoh/2022-10-03-at-18.54.52.png (2022-10-03-at-18.54.52)

Alignment

Here you can change the Alignment of your SVG Animation.

SVG

Color

You can change the Color of your Animation here.

Width

Here you can adjust the Width of the Animation.

Advanced Options

Use the advanced options to give your SVG Animation module custom CSS ID’s and Classes. Add some custom CSS for advanced styling and designate the module's visibility on certain devices.